Aston Martin V12S - Decontamination and Ceramic Coating
This amazing Aston Martin V12S. arrived at our detailing for a two stage Kamikaze two stage Enrei ceramic coating package.
The client also wanted a deep gloss shine, so we chose two particular products.
Firstly the Kamikaze’s Enrei and secondly the ISM Pro.
The Kamikaze Enrei is a 2 part coating, that has the best of both worlds with the strength in the base coat.
To finish off and give that superior glossy finish, we applied the ISM Pro, to give that slick glossy top layer.
However before we could start on this amazing Aston Martin V12S, we had to carry out our standard pre work inspection and preparation
As all vehicles MUST be fully decontaminated and polished before an application to ensure that the coating can fully bond to the surface. Polishing the paint before an application is paramount to the overall finish, if the paint is not polished the ceramic coating will ‘lock in’ swirled paint, leaving a sub-standard finish.
Prior to any ceramic coatings application Marque One Detailing will undertake the following steps to ensure the paint is perfectly prepared for the coating. These steps are undertaken on every ceramic application, this is known as the ‘preparation’ stage
Work That was carried out
However before we could start work on bring the paint work of this Aston Martin V12S back to its former pristine best, we had to carry out our standard pre detailing inspection and preparation.
Which included a full decontamination, including the following, before we could start on the paint correction process.
Full safe wash
Water spot removal
Iron fall out remover
Paint depth analysis
Colour Range Index (CRI) inspection
1,2 or 3 stage paint correction
24 hour cure time
Pure water rinse and dry
When the above was completed, we were then able to start the process of applying the Ceramic Coating to this car, which included the following form our
IGL Quartz or Kamikaze Enrei with ISM PRO