Ferrari 355 Receives a Mini Restoration

Ferrari 355 Receives a Mini Restoration Including a three-stage polish, plus a full bespoke PPF front end installation

We at Marque One Detailing had the honour and privilege to work on the amazing Ferrari 355, that came into our detailing studio at Northfield Milton Keynes’s, which ended up as a mini restoration project.

Work That was carried out

However before we could start working on this 355 , we had to carry out our standard pre detailing inspection and preparation.

Which included a full decontamination, including the following, before we could start on the paint correction process.


Hand washing, Drying, In depth decontamination,


Paint depth readings, Pad and polish choice,

Post polishing inspection.

Sealants. Waxes,

When the above was completed, we were able to then start the process of restoring and rejuvenating the paintwork of a vehicle as part of a “Paint Correction” process.

This process is mostly through the elimination of surface imperfections, that dull, oxidize, or haze the surface by reflecting light off in various directions, therefore detracting from a true and proper, clean, sharp, reflection

This was a case of not only a mini restoration job, but also a three-stage polish, using Modesta UK coatings as well as a full bespoke PPF front end installation.

As you might expect when undertaking these types of projects, the list was going to be a long one.

To start with, we had to overcome the “Ferrari Sticky Button” problem, so we removed all of the buttons in the interior and had them “3D” scanned and laser etched, which turned out better that the originals, which you cannot buy.

The roof was fully deep cleaned and re – dyed with three coats of dye before being resealed.

The front end of this beauty received a full front end PPF (Paint Protection Film), which was a “Bespoke” installation due to no templates available for this particular model.

A “Three Stage” polish coating from Modesta UK was applied to the rest of this “prancing horse” to give long term protection.

All wheels were deep cleaned and coated, as well as the callipers and inner arches, we also under took a full interior deep clean, with all areas sealed.

The engine bay also received the full treatment, which included a full deep clean and dressing.

Finally, the “Air bag” was removed, as well as the original leather, which was re stitched, glued and reinstalled as it should be.

This Lady was then taken for her MOT on behalf of the client. A big thanks must go to Penning UK for the removal/refit of all part’s especially the airbag.

For more information on our Detailing, Ceramic Coating & Paint Protection packages, including our PPF application service.

Contact us by using the link button below

Call us on 07548675497
or 07840039615 | Email us at you can also use our contact form on the contact us page